MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] a128 to Robertson autopilot


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] a128 to Robertson autopilot
12-05-19, 10:11 AM (This post was last modified: 12-05-19 11:47 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] a128 to Robertson autopilot
I am going to try and interface my autopilot to my a128. It’s an older Robertson using NEMA 0183. I am going into the a128 from the autopilot so I would be using its
Heading sensor. Then out of the a128 to the autopilot and it should drive to a waypoint. The manual doesn’t have the wiring diagram. I am also going to have to extend the wires. What gauge is the wire and do you have a cable to extend it that’s color coded the same
Thanks Sherman
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] a128 to Robertson autopilot - Theman772 - 12-05-19 10:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)