The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Pathfinder/C120 problem
12-05-19, 09:57 PM (This post was last modified: 12-06-19 11:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Pathfinder/C120 problem
My C120/4Kw Pathfinder radar has a 0.8 nm. totally blank area all around in all ranges. We swapped the radar to a 2Kw but with the same result. At this stage an internal diagnostic test was carried out and every component passed. The next step was to use another C120 but again with the same 0.8nm. blank area.
It was suggested that as the scanner is 10 metres above water level it would not pick up close in objects. I quickly dismissed this as basic navigation trigonometry shows the lower edge of the beam touches the surface at 46 metres.(10/tan12.5degrees).
Can anybody point me in the right direction or have a solution to my problem before I pull out what remaining hair I have left.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Pathfinder/C120 problem - Bomber59 - 12-05-19 09:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)