The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Raymarine SPX10 / ST8002 to Garmin NMEA Network?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine SPX10 / ST8002 to Garmin NMEA Network?
12-11-19, 07:24 AM (This post was last modified: 12-11-19 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
chkjk Offline
Junior Member
**
 		Posts: 2
Joined: Dec 2019
Reputation: 0
[CA11] Raymarine SPX10 / ST8002 to Garmin NMEA Network?
Hello,

I have a Sea Ray Sedan Bridge and am trying to connect a Raymarine SPX10 autopilot and ST8002 control head to a Garmin 1040xs Chartplotter with an NMEA2000 backbone.

It is my understanding I can connect the SPX 10 directly to the NMEA 2000 backbone using a Seatalk NG to DeviceNet Adapter Cable. Is this correct?

I am having trouble figuring out the best way to interface the ST8002 Control Head with the SPX 10. The Garmin Chartplotter and Control Head will be on the flybridge while the other components are down below. Can I simply add the ST8002 to the network using a Seatalk-Seatalkng converter where the NMEA 2000 backbone terminates?

Thank you in advance for your help and suggestions!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Raymarine SPX10 / ST8002 to Garmin NMEA Network? - chkjk - 12-11-19 07:24 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication