Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?
12-20-19, 03:21 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer?
Welcome to the Raymarine Forum SloMotion,

Should the transducer have been directly (i.e. no adapter used) mated to the c97 MFD's Transducer socket, then it would not be a DownVision (DV) transducer ... it would be an A-Series 50kHz/200kHz conical fishfinder transducer. The A80488 is offered to adapt A-Series 50kHz/200kHz conical fishfinder transducers for use with Axiom RV MFDs. Should you respond with a photo of the information print on the transducer's identification tag (attached to the plug end of the transducer's cable), then I may be able to positively identify the transducer which is presently installed onboard.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Replacing a c97 with Axiom 9 RV - which adapter for DV transducer? - Chuck - Raymarine - Moderator - 12-20-19 03:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication