Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] SeaTalk1 to NMEA 2000
01-06-20, 04:59 PM
Post: #4
RE: [TG11] SeaTalk1 to NMEA 2000
Hello Neil,

Yes, assuming that you do get 0183 AIS data into the C80 via a multiplexer at a later date, that works fine. Just be aware that there is not (unfortunately) an STNG Backbone (blue) to Devicenet adaptor cable accessory available, so you'll need to cut/join a standard backbone cable with a standard Devicenet cable. The wire colours will be the same.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-03-20, 06:41 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-06-20, 03:51 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-06-20 04:59 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-07-20, 09:03 AM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-19-20, 06:46 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-20-20, 07:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)