Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] SeaTalk1 to NMEA 2000
01-21-20, 01:16 AM
Post: #10
RE: [TG11] SeaTalk1 to NMEA 2000
A Seatalk1-SeatalkNG convertor will convert most standard navigation data from STNG to the C80's Seatalk, but not AIS (Seatalk was developed before AIS existed.)
The pilot cannot read 38400 NMEA, only 4800.

The only way to get AIS data into a C80 is directly-connected 38400 NMEA0183. This could come directly from the AIS or via a suitable 3rd-party 2000<->0183 interface.

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-03-20, 06:41 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-06-20, 03:51 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-07-20, 09:03 AM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-19-20, 06:46 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-20-20, 07:17 PM
RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-21-20 01:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)