Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom 9 interface to ST60 instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-08-20, 01:58 PM (This post was last modified: 01-08-20 03:20 PM by Chuck - Raymarine - Moderator.)
Post: #7
Captain Kirk Offline
Junior Member
**
 		Posts: 20
Joined: Dec 2019
Reputation: 0
RE: [CA11] Axiom 9 interface to ST60 instruments
Thanks Chuck

Q3 great answer I'm clear on now on Q3.

Follow-up on Q2 - If I change my mind on keeping the Inst power separate from the Autopilot power, IE go with a single supply point could i simply pull off and insulate the red lead at the ST (b) port on the 150G ? I'm just considering this if it is an option.

New Question
Q4. in the future to add an AIS or VHF for example could I extend the backbone by using a STng starter kit?

Kirk
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Captain Kirk - 01-08-20 01:58 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication