Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro 12 not recognizing StNG autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro 12 not recognizing StNG autopilot
01-09-20, 10:55 AM (This post was last modified: 01-09-20 10:57 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro 12 not recognizing StNG autopilot
Welcome to the Raymarine Forum John,

As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command. Please click here to view a FAQ addressing this subject. As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro 12 not recognizing StNG autopilot - Chuck - Raymarine - Moderator - 01-09-20 10:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication