The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Autohelm ST6000+ Display problems
01-22-20, 09:44 AM (This post was last modified: 01-30-20 04:52 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Autohelm ST6000+ Display problems
The display on my control unit seems to have a connection issue. When switched on the display shows everything (see attached picture) and then every 20-30 seconds or so it shows the normal screen for a second or so. It appears to control the rudder as expected - or at least the rudder moves when I press +1 or -1 but for most of the time the display is unreadable.

The unit is part of the Autohelm 6000 and is connected to the Course Computer with a Seatalk cable that is plugged in securely both ends.

Is there anything I should try to get the display working properly? is there anything inside the control unit itself that could be be looked at to see if there is a poor connection?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Autohelm ST6000+ Display problems - wotdoino - 01-22-20 09:44 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)