[CA11] Networking E-125 to Ais 250

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Networking E-125 to Ais 250

01-23-20, 09:46 AM (This post was last modified: 01-23-20 11:28 AM by Chuck - Raymarine - Moderator.)

Post: #1

sharkbite42 Offline

Junior Member

Posts: 3
Joined: Nov 2016
Reputation: 0

[CA11] Networking E-125 to Ais 250

I currently have an e-127 (master) an e-125 and 2 a78 all networked together via raynet. My VHF is connected to the e-127 via 0183. Brown, yellow, white, green wires coming out of the power cable. My question is
How do I add the AIS to the network. Via 0183. Can I parallel the cables from the e-127. Or should I use the cable coming out of the e-125.
If done this way. Will it display on all MDFâ€™s, or just the one it is connected to.
Thanks

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Networking E-125 to Ais 250 - sharkbite42 - 01-23-20 09:46 AM

RE: [CA11] Networking E-125 to Ais 250 - Chuck - Raymarine - Moderator - 01-23-20, 11:37 AM

User(s) browsing this thread: 1 Guest(s)