Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom versus a78, stalemate

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom versus a78, stalemate
01-23-20, 01:57 PM (This post was last modified: 01-23-20 01:57 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom versus a78, stalemate
Welcome to the Raymarine Forum Greyharbor,

Please click here to view a FAQ addressing this subject. As indicated therein, a-Series MFDs (a member of the legacy a/c/e-Series MFD family) cannot be interfaced via Ethernet communications to a MFD running LightHouse 3 software (i.e. Axiom/Axiom Pro/Axiom XL MFDs). As indicated therein the a-Series MFD may alternatively be interfaced to the same backbone as is the Axiom Pro MFD ... however, data sharing will be limited to that specified within the referenced FAQ.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom versus a78, stalemate - Chuck - Raymarine - Moderator - 01-23-20 01:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication