[CA] [CA11] Axiom installation

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum,

Please click here to view a FAQ addressing replacement of an C-Series Classic MFD with an Axiom MFD.

Q1. It looks like besides the unit itself, I will need a new through-hull transducer for downscan and sidescan, a sonar box and a new GPS antenna since my unit location will be under a hardtop and the old antenna is unreliable. Do I have this about right.
A1. Indeed you appear to be on the correct path. A Raystar 150 GPS Sensor would be recommended for installation atop the hard top. To ensure that I can advise correctly, please respond with the following information:

- has a DSM250, DSM30, or DSM300 been installed onboard? If so, which one of these DSMs is installed onboard? Is the DSM operational?

- what is the maximum depth of water to be fished?

- what type of propulsion does the boat feature (inboard, outboard, I/O)?

- what is the deadrise of the hull?