[CA] [CA11] ST4000+ Drive Power Supply
|
02-04-20, 11:33 PM
(This post was last modified: 02-05-20 11:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] ST4000+ Drive Power Supply
Hello,
Currently my ST4000+ has a 12V connection and the drive motor is powered from ST4000+. I am reconfiguring my system to add SeaTalkNG network. Can ST4000+ be powered from SeaTalkNG and still provide power to the drive., or should the ST4000+ be directly connected to 12V power supply so that the drive is not getting power from SeaTalkNG? If I have to connect 12v power directly to St4000+ and still communicate on SeaTalkNG then I would have to remove power from the spur cable to ST4000+. What is the detailed procedure for this? The SeaTalkNG will already have a power supply. I've attached an image of my proposed configuration. Thanks! Andy |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] ST4000+ Drive Power Supply - andrew@apwengineering.com - 02-04-20 11:33 PM
RE: [CA11] ST4000+ Drive Power Supply - Chuck - Raymarine - Moderator - 02-05-20, 11:59 AM
RE: [CA11] ST4000+ Drive Power Supply - andrew@apwengineering.com - 02-06-20, 10:51 AM
RE: [CA11] ST4000+ Drive Power Supply - Chuck - Raymarine - Moderator - 02-06-20, 11:52 AM
RE: [CA11] ST4000+ Drive Power Supply - andrew@apwengineering.com - 02-06-20, 01:07 PM
RE: [CA11] ST4000+ Drive Power Supply - Chuck - Raymarine - Moderator - 02-06-20, 02:10 PM
RE: [CA11] ST4000+ Drive Power Supply - andrew@apwengineering.com - 02-06-20, 02:25 PM
RE: [CA11] ST4000+ Drive Power Supply - Chuck - Raymarine - Moderator - 02-06-20, 02:30 PM
|
User(s) browsing this thread: 1 Guest(s)