[LW] [LW11] acu200 +EV1 and st6002 compatibility???
|
02-05-20, 05:13 PM
(This post was last modified: 02-06-20 04:18 AM by Louise - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[LW11] acu200 +EV1 and st6002 compatibility???
My autopilot was made of x30 central unit, st6002 control unit, fluxgate compass and model 1 linear rudder drive . The network was seatalk 1 and included a ST60+ wind instrument.
The x30 failed and I had to change it for a ACU200 + EV1. I have been told that I could keep the st6002 linked to the ST60+ wind instrument , connected to the seatalk ng through a "seatalk ng to seatalk 1" converter. I have been told too that it would not give access to all the functions allowed by sp70 control head but without precision on what works and what doesn't. At first view, the system looks to work except that when starting st6002, I get the message calibration required (displayed twice) and then, I don't know how to commission the new system through the st6002 control head. The original manual for st6002 commissioning doesn't looks adapted and no other manual looks to give information? Also, with my st60+ Wind vane operational and normally linked to ST 6002 through seatalk 1, when I try to enter windvane mode, the message "no data" appears and alarm sounds. Is it one of the functions which could be not working in this new configuration... Or what could be wrong??? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] acu200 +EV1 and st6002 compatibility??? - getaway - 02-05-20 05:13 PM
RE: [LW11] acu200 +EV1 and st6002 compatibility??? - Louise - Raymarine - Moderator - 02-07-20, 09:32 AM
|
User(s) browsing this thread: 1 Guest(s)