MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[TG11] Installation system


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Installation system
02-09-20, 09:36 PM (This post was last modified: 02-10-20 02:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Installation system
Hi,
We just did a new installation consisting of:
MFD Es97 9”, 1 unit
I50- Speed display, 1 unit
I 50: depth display, 1 unit
I 60 – Wind display, 1 unit
I 70, 1 unit
ITC 5, 1 unit
We connected the 3 sensors (wind, depth and speed) to the ITC 5, asshown on the diagramme. No wind neither speed or depth indiciation where shown on any of the screens (the boat is still on shore so I don’t know for the depth, but we had the impeller turned to check if any speed indication came).
By pass passing the ITC5, (connection wind sensor direclty to I 60), we got wind indications on the MDF , I 60 and I 70. Wetried the same thing with the speed sensor but it didn’t work.

Could you plese let us know if our installation is correct or if we did anything wrong? How that can be corrected?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Installation system - jerome - 02-09-20 09:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)