The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] i70 depth erratic from ITC-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i70 depth erratic from ITC-5
02-16-20, 06:21 PM (This post was last modified: 02-19-20 03:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
jefndeb Offline
Mainship 400
***
 		Posts: 54
Joined: Feb 2016
Reputation: 0
[CA11] i70 depth erratic from ITC-5
Hello Chuck,

Per the diagram attached, any suggestions as to why the depth indication on the i70 would stay at 2.2 feet?... and every once in a while display the correct depth (as compared to the depth shown on the Axiom) which is coming from the B744 which is connected to the Axiom 9 mounted below?

The P79 is feeding the ITC-5 converter which I am guessing is where the i70 is getting its depth from...

Thanks,,,Jeff


Attached File(s) Thumbnail(s)
   

.pdf  Visio-Indigo Star 8.pdf (Size: 27.68 KB / Downloads: 193)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] i70 depth erratic from ITC-5 - jefndeb - 02-16-20 06:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication