The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro with CP570 and dual 2kw Transducers
02-20-20, 11:44 AM (This post was last modified: 02-20-20 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro with CP570 and dual 2kw Transducers
Can the Axiom Pro with a CP570 handle 2, 2kw transducers? total 4KW on the CP570.
Currently have a Raymarine 2KW R109LH connected to the CP570, and would like to add an additional Raymarine 2KW R409LM-W to the CP570.
Manual and advertisement is a little confusing, and hope you can clarify for me.
Please see the pictures attached. On Raymarine site it says capable of 4kw.
The R109LH would be a Low High Transducer, primarily use it as a High frequency transducer, and the R409LM-W more used as a medium, and Low wide transducer.
I would not use it simultaneously. I would use each 2kw transducer separately, and at different times. Worst case, and I'm trying to avoid adding a second CP570 black box.
Please advise,
Thank you!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom Pro with CP570 and dual 2kw Transducers - Fish On - 02-20-20 11:44 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)