The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [CA] [CA11] E120 Classic

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 Classic
02-22-20, 02:56 PM (This post was last modified: 02-24-20 01:38 PM by Chuck - Raymarine - Moderator.)
Post: #1
wrlefevre20 Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2020
Reputation: 0
[CA11] E120 Classic
I have an E120 set up as master. It is connected to 4Kw analog Radome 24”, new cup unit (not dsm 300), gps antenna, and 5.62 software update.

My repeated is an E80 with 5.52 software. Connected via SeaTalkhs.

I had not data source message with Radome connected to E120. I checked all voltage and it was 12.7 volts at Radome. Checked all power supplies. I then hooked up Radome directly to E80 and now it works.

Don’t know if it’s software related in E120, the mfd?

Has anyone had this issue? I don’t want e80 to me master unless I have to. Bought the 120 not more than 8 months ago.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E120 Classic - wrlefevre20 - 02-22-20 02:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication