[TG] [TG11] Multi function display problem
|
02-26-20, 07:18 PM
(This post was last modified: 02-28-20 09:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] Multi function display problem
After a 12 month break from sailing due to injury l was preparing to make the 1640 N mile hop down to Darwin. When l switch on my Raymarine Eseries plotter the lower half of the screen is blank, the upper half is white with some pale yellow details showing.....
From memory l pushed screen buttons and could see changes occurring but it was unusable for navigating. Any suggestions? The unit is six years old. It is mounted inside the cabin near the chart table. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] Multi function display problem - david.wright811 - 02-26-20 07:18 PM
RE: [TG11] Multi function display problem - Tom - Raymarine - Moderator - 02-27-20, 01:06 AM
RE: [TG11] Multi function display problem - david.wright811 - 02-28-20, 09:15 AM
RE: [TG11] Multi function display problem - Tom - Raymarine - Moderator - 03-02-20, 09:59 PM
RE: [TG11] Multi function display problem - david.wright811 - 03-03-20, 02:20 AM
|
User(s) browsing this thread: 1 Guest(s)