MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[LW11] Connect AIS500 to E95


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Connect AIS500 to E95
02-29-20, 09:16 AM (This post was last modified: 03-02-20 11:13 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Connect AIS500 to E95
I have a problem connecting the AIS500 to the E95. I tried both NMEA port 1 and the Seatalk NG.

Why isn’t there any reference to the Seatalk NG within the Lighthouse software of the E95? No idea if it works.

The manual mentions to first set the NMEA port and then go the external components and set the AIS. However the menu doesn’t show any AIS device at all.

The AIS500 seems to be working fine. I see the boat on MarineTraffic. But no idea about whether or not it communicates with the E95 via NMEA of Seatalk NG.

NMEA port 1 on E95 seems to be working fine because when I connect another NMEA source it shows the data.

So how can I view the AIS menu on the E95 en how can I check the AIS500 communicates over either NMEA and Seatalk NG
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Connect AIS500 to E95 - Marien - 02-29-20 09:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)