[DG11] NMEA 0183 to ST2000 Queston

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] NMEA 0183 to ST2000 Queston

03-26-20, 09:26 AM

Post: #9

Louise - Raymarine - Moderator Offline

Administrator

Posts: 867
Joined: Sep 2018
Reputation: 1

RE: [DG11] NMEA 0183 to ST2000 Queston

Dear nssailor,

Thank you for the response.

I have tried to source the original code from when the unit was designed, I cannot confirm if the ST2000 does apply the variation to a BTW in true.

It looks like it does not I am afraid. If you can send out the bearing to waypoint NMEA0183 sentence from your plotter with magnetic applied - it should show this.

On this occasion I cannot help further.

Many Thanks
Louise

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] NMEA 0183 to ST2000 Queston - nssailor - 02-29-20, 06:52 PM

RE: [DG11] NMEA 0183 to ST2000 Queston - Louise - Raymarine - Moderator - 03-04-20, 06:06 AM

RE: [DG11] NMEA 0183 to ST2000 Queston - nssailor - 03-04-20, 09:31 PM

RE: [DG11] NMEA 0183 to ST2000 Queston - Louise - Raymarine - Moderator - 03-10-20, 09:02 AM

RE: [DG11] NMEA 0183 to ST2000 Queston - nssailor - 03-14-20, 07:07 PM

RE: [DG11] NMEA 0183 to ST2000 Queston - Louise - Raymarine - Moderator - 03-17-20, 05:39 AM

RE: [DG11] NMEA 0183 to ST2000 Queston - nssailor - 03-21-20, 06:26 PM

RE: [DG11] NMEA 0183 to ST2000 Queston - Louise - Raymarine - Moderator - 03-26-20 09:26 AM

User(s) browsing this thread: 2 Guest(s)