The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] S100 remite behaviour when batteries are empty
03-05-20, 04:33 AM (This post was last modified: 03-05-20 11:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] S100 remite behaviour when batteries are empty
I'm using a S100 remite with my SPX30 autopilot. It works fine and it's for me a very important accessory as the head control is at the chart table. So, in the cockpit, I'm only using the S100 to adjust the pilot at the helm.
However, the remote has a behaviour that does not sound logic to me when batteries are getting empty. It quickly displays a "low battery" message along with a hip and when it shutdowns, it puts the autopilot in stand by. This leads sometimes to crazy situations, especially in high wind.
Even if I put the pilot in Auto more on the pilot head control, it still has the same behaviour. For me, it's not correct as it is only a "slave" in the system
Is there a way to adjust it, any workaround ?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] S100 remite behaviour when batteries are empty - Korrigan - 03-05-20 04:33 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)