[CA11] Connect Raystar 125 to E95 NMEA 0183

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Connect Raystar 125 to E95 NMEA 0183

03-05-20, 04:05 PM (This post was last modified: 03-05-20 04:36 PM by Chuck - Raymarine - Moderator.)

Post: #1

Marien Offline

Junior Member

Posts: 9
Joined: Mar 2018
Reputation: 0

[CA11] Connect Raystar 125 to E95 NMEA 0183

Hi,

I want to connect the Raystar125 to the NMEA0183. The manual is not clear as it does not show a possibility of the GPS with only NMEA OUT + and the plotter with NMEA IN + and -.
I understand I need 12V and ground/0 for the antenna and connect the 2 not used wires to ground. But what do I connect to the IN - on the plotter?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Connect Raystar 125 to E95 NMEA 0183 - Marien - 03-05-20 04:05 PM

RE: [CA11] Connect Raystar 125 to E95 NMEA 0183 - Chuck - Raymarine - Moderator - 03-05-20, 04:52 PM

RE: [CA11] Connect Raystar 125 to E95 NMEA 0183 - Marien - 03-06-20, 04:02 AM

RE: [CA11] Connect Raystar 125 to E95 NMEA 0183 - Chuck - Raymarine - Moderator - 03-06-20, 10:56 AM

RE: [CA11] Connect Raystar 125 to E95 NMEA 0183 - Marien - 03-07-20, 12:52 PM

User(s) browsing this thread: 1 Guest(s)