The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Test ITC-5
03-15-20, 02:34 PM (This post was last modified: 03-16-20 03:57 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Test ITC-5
I got a ITC-5 and an Airmar Tri sensor for speed/depth/temp. Since my boat is quite some miles away I did a dry run test at home.
I connected the sensor to the ITC-5 according to colours, put two terminators in the back bone connectors and a power supply to the spur connector.
I expected the LED status indicators for speed, depth and SeatalkNG to show a solid green light, the others to show intermitted pulse (since no sensors connected). However what I get is a solid light for SeatalkNG indicator, all others are off.
Then I disconnected the transducer (so no sensors at all). Again staus for SeatalkNG ok, all other LEDs off. Does this indicate a defect for the ITC-5?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Test ITC-5 - bertl - 03-15-20 02:34 PM
RE: [DG11] Test ITC-5 - bertl - 03-19-20, 05:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)