The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Networked es127 MFDs not Sharing Data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Networked es127 MFDs not Sharing Data
06-08-16, 01:27 AM
Post: #1
aaeejrb Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Networked es127 MFDs not Sharing Data
Just installed a Quantum Radar and two es127 displays connected via SeatalkNG backbone per Reference Manual 81300-1, but the displays are not sharing charts, sonar, or radar data. Updated both MFDs to Lighthouse II Ver. 17, and Quantum radar to latest software with no change. There are no Data Master messages on startup and the data master menu shows only the local MFD on each display. In <Setup <diagnostics <Select Device all devices on the SeatalkNG bus show up and report S/N and software version appropriately. So, the MFDs are seeing each other on the network, but not sharing data across it. Any suggestions for a fix, or further troubleshooting that can be done? Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Networked es127 MFDs not Sharing Data - aaeejrb - 06-08-16 01:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication