Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11]AIS650 Crashing NMEA2000 Network
03-24-20, 07:18 AM
Post: #2
RE: [LW11]AIS650 Crashing NMEA2000 Network
Dear Auqabelle,

While not particularly common, SeaTalkng / NMEA 2000 can fail in a manner which will crash the SeaTalkng/NMEA 2000 backbone. It is recommended that you verify that the AIS650 and the other devices which have been interfaced to the SeaTalkng / NMEA 2000 backbone have each been updated with the respective latest available Raymarine product software update.
If so, and should the problem persist, then it is recommended that the AIS650 be sent to Raymarine’s Product Repair Center to be bench checked / serviced along with the adaptor cable.
In the interim, should the system feature a MFD having a NMEA 0183 input port, then you may want to consider interfacing the AIS650's 38400 BAUD NMEA 0183 leads to the MFD's NMEA 0183 leads to support bidirectional communications with the AIS650 to permit its Silent Mode feature to be configured on/off. The corresponding NMEA 0183 port of the MFD would then need to be configure to "AIS 38400".

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11]AIS650 Crashing NMEA2000 Network - Louise - Raymarine - Moderator - 03-24-20 07:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)