Raymarine forum / Raymarine Forums / Communications v / [CA] [CA11] RS125 - No communication

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RS125 - No communication
04-03-20, 08:13 AM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] RS125 - No communication
Zulu,

Q. Is that ok or should it be powered by a separate switched 12VDC power circuit?
A. This would not be considered to be a best installation practice, as it will not permit the power state of the SeaTalkng / NMEA 2000 backbone ... and therefore the SeaTalk bus ... to be controlled independently from that of the MFD. Please refer to the items specified within my last response. Should these have been addressed andshould the problem persist, then please attach a system diagram identifying each marine electronics device within the system, how each device has been interfaced to the system, and how it is being powered.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RS125 - No communication - Zulu - 03-26-20, 07:23 PM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 04-03-20 08:13 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication