[CA] [CA11] M232 W/Axiom MFD's - no video
|
03-30-20, 12:19 PM
Post: #2
|
|||
|
|||
RE: [CA11] M232 W/Axiom MFD's - no video
Welcome to the Raymarine Forum Nick,
It is recommended that the power and ground be inspected from the camera through to breaker panel and ground to ensure that all connections are tight and free of corrosion. Should any inline fuses be installed in the camera's power circuit, then these too should be inspected. If no issues are found, then please indicate whether the system include a Joystic Control Unit. Alternatively, the MFDs may be the only means of interacting with the camera. Finally, has the camera been interfaced to a network switch or directly to the MFD? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] M232 W/Axiom MFD's - no video - nmp427 - 03-27-20, 05:04 PM
RE: [CA11] M232 W/Axiom MFD's - no video - Chuck - Raymarine - Moderator - 03-30-20 12:19 PM
|
User(s) browsing this thread: 1 Guest(s)