The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AR200 Output....
03-30-20, 07:09 AM (This post was last modified: 03-31-20 08:34 AM by Chuck - Raymarine - Moderator.)
Post: #1
Music [CA11] AR200 Output....
Hello, I was wondering if the AR200 can be wired to output the GPS, Heading and Pitch/Roll data via NMEA 0183? I have a data logger that I interface with a Garmin 19x (GPS Only) or an Airmar GH2183 (GPS/Heading/Pitch/Roll).

I'm interested in interfacing with the AR200 but it appears it may only output NMEA 2000. I was unable to find any Wiring diagrams or pin-out information on the site regarding this.

Any advice/input you can provide is greatly appreciated.

Best Regards.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AR200 Output.... - wakes007 - 03-30-20 07:09 AM
RE: [CA11] AR200 Output.... - morepower - 04-08-20, 02:24 AM
RE: [CA11] AR200 Output.... - morepower - 04-09-20, 02:49 PM
RE: [CA11] AR200 Output.... - morepower - 04-10-20, 02:35 AM
RE: [CA11] AR200 Output.... - morepower - 04-10-20, 03:30 PM
RE: [CA11] AR200 Output.... - morepower - 04-13-20, 03:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)