[CA] [CA11] AR200 Output....
|
04-08-20, 02:24 AM
Post: #3
|
|||
|
|||
RE: [CA11] AR200 Output....
Hi Chuck.... I'm looking at doing something similar to this I.E I'm looking at integrating a AR200 into my current system to replace my Raystar RS125Gps unit and my Fluxgate Gyro Compass and Smart heading system....
Please correct me if I'm wrong, But am I correct in thinking that the AR200 would plug directly into my Seatalkng/Seatalk backbone/Converter... Therefore enabling me to remove the GPS and SHS/Gyro Units.... Kind Regards Tim |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] AR200 Output.... - wakes007 - 03-30-20, 07:09 AM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 03-31-20, 08:51 AM
RE: [CA11] AR200 Output.... - morepower - 04-08-20 02:24 AM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 04-08-20, 08:37 AM
RE: [CA11] AR200 Output.... - morepower - 04-09-20, 02:49 PM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 04-09-20, 04:07 PM
RE: [CA11] AR200 Output.... - morepower - 04-10-20, 02:35 AM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 04-10-20, 08:33 AM
RE: [CA11] AR200 Output.... - morepower - 04-10-20, 03:30 PM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 04-13-20, 08:24 AM
RE: [CA11] AR200 Output.... - morepower - 04-13-20, 03:00 PM
RE: [CA11] AR200 Output.... - Chuck - Raymarine - Moderator - 04-13-20, 04:51 PM
|
User(s) browsing this thread: 1 Guest(s)