[LW] [LW11] ST-50 INSTRUMENTS

[Derek - Raymarine - Moderator]

Hi Elica

Sorry no picture attached, however a simple test is to turn the lights on on one of the other disply and check the lights come on on the multi, if they don't - this confirms the network is down between the two displays and you need to chase connections, cable damage or look at the possibility one of the displays is faulty.

The lights should come on on all the displays, this confirms that they are all communicating. Once the fault is identified, could be a short or could be open circuuit between the Yellow and the screen or yellow and the red, once the fault is removed, the system will recover.

Regards

Derek