Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS650 to C140W
04-27-20, 07:35 AM (This post was last modified: 04-27-20 07:35 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] AIS650 to C140W
Pan76,

C-Series Widescreen MFDs were not designed and tested to bridge AIS data to SeaTalkng. Should the E-Series Classic MFD not have been interfaced to the AIS250 via NMEA 0183 and should it presently support displaying AIS target data, then it would appear that you may have interfaced the E-Series Classic MFD to the C-Series Widescreen MFD via Ethernet (SeaTalkhs) networking. Please note that E-Series Classic MFDs are have only been designed and tested to be interfaced via Ethernet communications to other E-Series Classic MFDs. Similarly, C-Series Widescreen MFDs have only been designed and tested to be interfaced via Ethernet communications to one other C-Series Classic MFDs. C-Series Widescreen MFDs have not been designed and tested to be interfaced via Ethernet communications to other models of MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS650 to C140W - Pan76 - 04-24-20, 11:07 AM
RE: [CA11] AIS650 to C140W - Pan76 - 04-25-20, 09:21 AM
RE: [CA11] AIS650 to C140W - Chuck - Raymarine - Moderator - 04-27-20 07:35 AM
RE: [CA11] AIS650 to C140W - Pan76 - 04-27-20, 10:55 AM
RE: [CA11] AIS650 to C140W - Pan76 - 04-27-20, 02:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)