[CC11] Adding 2nd screen to c127
|
05-04-20, 01:17 PM
(This post was last modified: 05-04-20 02:00 PM by Chris - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CC11] Adding 2nd screen to c127
Couple of Questions
1. I have a fairly new c127 MFD on an older boat and wish to add a 2nd 12" MFD, as the matching MFD's A, C or E are not longer available are the latest Raymarine MFD compatible with the c127 and if so which is the recommended model. 2. The boat has an older Interphase forward and side scanning sonar, but if I wanted to use the sonar capability what transducer do I need (there is already of basic transducer connected to the original Raymarine dedicated display...would this work connected to the c127? 3. If I wanted to see engine details (temp, oil pressure etc) from my older mechanic Volvo diesels what would I need to interface this with the NMEA 0183 backbone. Thanks |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CC11] Adding 2nd screen to c127 - ajmevans - 05-04-20 01:17 PM
RE: [CC11] Adding 2nd screen to c127 - Chris - Raymarine - Moderator - 05-08-20, 01:54 PM
|
User(s) browsing this thread: 1 Guest(s)