[CC11] Adding 2nd screen to c127
|
05-08-20, 01:54 PM
Post: #2
|
|||
|
|||
RE: [CC11] Adding 2nd screen to c127
Hello ajmevans,
Q1. I have a fairly new c127 MFD on an older boat and wish to add a 2nd 12" MFD, as the matching MFD's A, C or E are not longer available are the latest Raymarine MFD compatible with the c127 and if so which is the recommended model. A1-The only displays you can add are the a,c,and e Series displays. The current Axioms are not compatible. Q2. The boat has an older Interphase forward and side scanning sonar, but if I wanted to use the sonar capability what transducer do I need (there is already of basic transducer connected to the original Raymarine dedicated display...would this work connected to the c127? A2-The Interphase and c127 have limited compatibility. The c127 can show video from the Interphase and that is it. Q3. If I wanted to see engine details (temp, oil pressure etc) from my older mechanic Volvo diesels what would I need to interface this with the NMEA 0183 backbone. A3-If the engines support the output of NMEA2000 this can be done. If they do not support NMEA2000 output then no. Chris, |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CC11] Adding 2nd screen to c127 - ajmevans - 05-04-20, 01:17 PM
RE: [CC11] Adding 2nd screen to c127 - Chris - Raymarine - Moderator - 05-08-20 01:54 PM
|
User(s) browsing this thread: 1 Guest(s)