The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] AIS transeiver advice for e120
05-12-20, 06:23 AM (This post was last modified: 05-14-20 08:54 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] AIS transeiver advice for e120
Hello - we have a fully integrated e120 system circa 2006. We have AIS receiver capability. We'd like to upgrade to an AIS transceiver. So, is there just a 'receiver' box we can add to our system? Or do we need to be a new transceiver box?

Also, I'm not actually sure how we are currently receiving AIS - eg which antenna is being used, which box under the dash is the AIS, etc but its all integrated into the e120. We have two tall white radio antennas (at least one must be the VHF), a small white domed unit which i think is the DGPS, and another short black antenna which is I think a Leica differential receiver for our Simrad heading sensor.

It may be obvious that we have just purchased a boat with a full suite of Raymarine kit but we've got no local support where we're situated! Any advice welcome. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] AIS transeiver advice for e120 - pbrewin - 05-12-20 06:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)