The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i70s AIS off
05-14-20, 02:59 PM
Post: #1
i70s AIS off
Splashed my boat today and restarted all my Raymarine and networked electronics and everything worked fine including ais on my 2 axiom 9s as well as my i70s. The ais signal is received from my Standard Horizon GX2200. Before I came to the boat I saved the most recent Axiom update onto a micro sd so after I determined that all the Navigation systems were working I inserted the card In one of the Axioms and updated all the components (see the linked image which shows all my networked devices and their updated versions). After a successful update for everything in the list, I replaced the sd Update card With my Navionics platinum+ card and restarted all my electronics. Everything works fine except my i70s now shows AIS off and I can’t seem to figure out how to turn it on. As I mentioned, it worked fine before the update. My Standard Horizon is showing AIS data, both my Axiom 9’s show the AIS data but my i70s shows AIS off. When I go to the i70s menu/quick options and select View AIS targets it doesn’t turn on the AIS. Am I doing something wrong?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
i70s AIS off - Tamrow - 05-14-20 02:59 PM
RE: i70s AIS off - Tamrow - 05-20-20, 09:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)