The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] new axiom old instuments/auto pilot
05-15-20, 10:13 AM (This post was last modified: 05-19-20 11:41 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] new axiom old instuments/auto pilot
i got all my new stuff
a few questions
everything is new except the auto pilot and wind instruments (seatalk)
1) i have an st6000+ control and an a100/300 computer
you recomended using the nmea 183 not seatalk for the autopilot to connect to the ng network and recomended the Actisense NGW-1-ISO-STNG can i use the nmea 0183 to seatalkng converter hub?(one yellow two whites two blues)
Also when these 3 types of networks are connected Where should they get their power? the ng hub will be hooked up to an axiom 12. does it get power there?
I think it gets power from the autopilot as well. The hubs can also be powered, i dont want to add multiple power.
2) My AIS700 will also be hooked to the ng . does it get power there or does it need it's own power supply?
3) the axiom has its own built in antenna and i have the AR200 hooked into the network. Do i still need a gps antenna?
If so mine is 20 years old, should i get a new one?
4) ok lastly... I have the cam210 hooked up to the powered HS5 switch. Does the camera need additional power? It has a power wire but i don't think I need it .
As you can see I spent alot of money :( still not back to work
thanks in advance
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[TG11] new axiom old instuments/auto pilot - robo - 05-15-20 10:13 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)