The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / CAM220IP Bend Horizon

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAM220IP Bend Horizon
05-15-20, 07:26 PM
Post: #1
JPCavanagh Offline
Junior Member
**
 		Posts: 3
Joined: Jun 2019
Reputation: 0
CAM220IP Bend Horizon
The attached image shows in the top left the picture from a CAM220IP which is 10.5m above the water line. The bottom left shows a similar picture from an M232 about 0.5m higher.

The M232 picture (with its tighter field of view) shows a level horizon. (Slightly slanting because the boat was moving and stabilization was off).

The CAM220IP shows a much more curved horizon across its' FOV.

I cant find a setting to correct this curvature.

Please advise.

Thanks
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CAM220IP Bend Horizon - JPCavanagh - 05-15-20 07:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication