The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CC] [CC11] i60 Wind Instrument Readings
05-18-20, 02:26 PM (This post was last modified: 05-20-20 10:47 PM by Tom - Raymarine - Moderator.)
Post: #1
[CC11] i60 Wind Instrument Readings
This is a followup to my message of yesterday- my i60 wind instrument is showing either no wind speed readings or erratic readings going from 99.9 knots down to what might be the actual wind speed. In addition, there is an audible hum from the instrument but not from the others in the suite. I was able to get readings at the wires coming from the mhu, at the junction and at the instrument- they are as follows

Color MHU Junc Instr (ALL VOLTS)
RED 7.9 7.9 7.9
BLUE 3.6 3.2 2.9
GREEN 4.9 4.9 4.7
YELLOW 2.9 2.6 3.0

Blue, green and yellow were all fluctuating as the wind gusted and swirled. Would I be right in assuming that since the numbers are in the "normal" range that the display is malfuntioning or do the numbers show something else.

Thanks for your assistance

Nigel
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CC11] i60 Wind Instrument Readings - nveater - 05-18-20 02:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)