Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] GPS data source selection "internal" or "internal (active)"
05-20-20, 11:34 PM
Post: #2
RE: [TG11] GPS data source selection "internal" or "internal (active)&q...
Hello tmass60,

I'm not sure why the same source was listed twice, but this is nothing to worry about. On data source selection, I would always suggest leaving this on 'Auto' unless there's a reason to do otherwise (you have more than one source of a particular type of data and you need to actively select one source over another, for example a low-quality and high-quality GPS in the same system.)

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] GPS data source selection "internal" or "internal (active)&q... - Tom - Raymarine - Moderator - 05-20-20 11:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)