Raymarine forum / Raymarine Forums / AIS v / [TG] [TG11] Can Axiom Pro connect with two WiFi devices at once?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Can Axiom Pro connect with two WiFi devices at once?
05-27-20, 01:30 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Can Axiom Pro connect with two WiFi devices at once?
Hello marty,

Bandwidth allowing, the MFD can connect to two Wifi devices at once, but that won't include AIS data. The NMEA2000 specification is for wired connections only: whilst some devices send navigation data over Wifi or Bluetooth, this isn't NMEA2000, it's a proprietary implementation. Your Raymarine MFD will not look for any AIS or other standard navigation data on a Wifi connection, it will only look for it on the standard (wired) NMEA2000 interface because that's all the NMEA2000 standard allows.

Sorry, but you will need to run that cable.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Can Axiom Pro connect with two WiFi devices at once? - Tom - Raymarine - Moderator - 05-27-20 01:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication