The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 Wind Direction No Longer Working
06-13-16, 07:05 PM
Post: #1
ST60 Wind Direction No Longer Working
We have recently upgraded our chartplotter to a Raymarine A98. We have existing Raytheon ST60 instruments in place- a tri-data, wind speed/direction and an autohelm (ST6000+). Since upgrading the chartplotter, the wind direction is no longer working. (The needle just bounces around irraticaly) The wind speed works great and the windvane up at the top of the mast appears to be working just fine. Also, the existing autohelm is connected with the chartplotter just fine and can be controlled from it. It is pointing in the right direction. We tried calibrating it (2 slow circles, entering calibration mode, pointin into the wind) but it didn't seem to do anything. Is there something we are missing? Any advice would be greatly appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 Wind Direction No Longer Working - svbloom - 06-13-16 07:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)