The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Airflow corrections

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Airflow corrections
05-27-20, 08:27 AM
Post: #1
SarasotaJack Offline
Junior Member
**
 		Posts: 1
Joined: May 2020
Reputation: 0
Airflow corrections
Our Wireless (Tacktick) T222 is easily aligned at 0 and 180 Degrees with the remote, but on port tack reads 7 degrees high when the wind vane is actually at 90 degrees. On starboard tack it reads correctly. We have tried correcting this using the Airflow adjustment on 2 different Maxi displays. With the indicator pointed in a normal upwind range using the upwind adjustment and also as if we were going downwind and using the downwind adjustment. The anemometer was rotating with about 5 knots indicated. When the adjustments are done, the Maxi display shows "stored", but there is no adjustment actually applied. (the observed errors are unchanged).

Ideas?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Airflow corrections - SarasotaJack - 05-27-20 08:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication