The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro?
05-29-20, 02:20 PM (This post was last modified: 06-09-20 09:12 PM by Tom - Raymarine - Moderator.)
Post: #1
Grady330 Offline
Junior Member
**
 		Posts: 16
Joined: Jun 2017
Reputation: 0
[TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro?
From what I read in one of your FAQ threads above, it sounds like it's as easy as running an NMEA2000 cable from the Fusion RA70 and using a Seatalk to NMEA2000 adapter and simply plugging it into an open port on the existing 5-port Seatalk connector. Am I reading that correctly?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro? - Grady330 - 05-29-20 02:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication