Axiom/Quantum Upgrade questions

[Chris - Raymarine - Moderator]

Hello solomon,

Please see my notes below,

My list of considerations:
SeaTalkNG adapter cable (A06045f) to connect to the existing 5 way (A06064) from the Axiom,
*Yes, the A06045 works for this, If you need more length the 1m version is A06075.

• A cable ( if there is one ) to tie the VHF/AIS into the 5 way
*There is. It is the NGW-1-STNG. This is a part made by actisense.

• Remove the converter (R52131) and replace with a 5 way and fuse, switch and power like the other.
*You do not have to remove the converter. I prefer to up-cycle converters by moving the power cable to the yellow port. The converter will then act as a five way.

• What would I need to connect the Quantum to the network via the data cable? A network switch?
*You do not need the HS5 switch. The cables supplied with the Quantum(wired installation) can plug directly into the back of the Axiom.

If the C120 is dash mounted you can also order the A80529 Adapter plate to fit the Axiom 12 into the C120 cutout.