The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] Networking 4 devices

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Networking 4 devices
06-02-20, 03:01 AM (This post was last modified: 06-11-20 01:11 AM by Tom - Raymarine - Moderator.)
Post: #1
Scottnic3 Offline
Junior Member
**
 		Posts: 5
Joined: May 2020
Reputation: 0
[TG11] Networking 4 devices
Hi Team.

I am trying to network 4 devices together - 2 A127 MFD's, an autopilot and a transducer via a CP370. My question is, can I network 4 devices using a standard 5 way connector (A06064 not an HS5) utilising one of the blue plugs at the end with a spur cable to a device and have just one terminator in the other blue plug?

OR, are the blue plugs used only for connecting another backbone cable and therefore I can only have three devices connected using one standard 5 way connector?

I'm really confused as to what I can and cant do with a standard 5 way connector so thank you for assistance with this one.

Cheers
Scott
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Networking 4 devices - Scottnic3 - 06-02-20 03:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication