Threaded Mode | Linear Mode

richardr54 · (This post was last modified: 06-18-20 11:53 PM by Tom - Raymarine - Moderator.)

I had a brand new HD Color Radome installed 3 days ago. It worked fine while the tech was on the boat and did the installation. We headed out to sea later in the day and the C95 MFDs no longer detect the radar. I went up the mast and have verified voltage at the entry to the radome. It is at 12.12v which is well within the specification. The green light flashes on the HS5 Seatalk Network Switch. Both MFDs have been reset to default values. Every once in a while, the MFDs do detect the radar and do the countdown for the warm up. As soon as the warm up is completed, the MFDs report "No radar" within a minute or so. We do not have the option of returning to Puerto Real in Puerto Rico to have the tech have a look. We are on our way to Grenada for hurricane season. I am desperately looking for troubleshooting advice. Please see attached pictures