The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing a remote alarm to an a/c/e/eS/gS-Series MFD
01-14-16, 04:52 PM (This post was last modified: 01-12-17 11:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
Interfacing a remote alarm to an a/c/e/eS/gS-Series MFD
Interfacing a remote alarm to an a/c/e/eS/gS-Series MFD

Of the a/c/e/eS/gS-Series MFDs, only Raymarine's gS-Series MFDs presently support use with an external piezoelectric horn. Many of those desiring to monitor alarms at a remote location onboard the vessel have elected interface an a65 MFD at the remote location(s) and then network the a65 MFD to the other a/c/e/eS/gS-Series MFDs installed onboard. Major benefits of installing a MFD at the remote location include information concerning the nature of the alarm, ability to squelch the alarm, and access to the features, data, and IP camera video supported by the other networked a/c/e/eS/gS-Series MFDs.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Interfacing a remote alarm to an a/c/e/eS/gS-Series MFD - Chuck - Raymarine - Moderator - 01-14-16 04:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)