The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / Impossible to Display AIS Data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Impossible to Display AIS Data
06-20-16, 12:54 PM
Post: #1
jeokeefe@gmail.com Offline
Junior Member
**
 		Posts: 39
Joined: Mar 2016
Reputation: 0
Impossible to Display AIS Data
If a vessel with AIS is on or near a route that is programmed into the MFD (I have e147, e145 & a9)... If you click the vessel icon, the MFD only recognizes the route and the route options. I have found it impossible to bring up the AIS info (ex. boat name) in these situations. This has become a hazard as I frequently travel the East River and Hudson River and there is significant large commercial traffic that requires communication and agreement for safe passing. I have been struggling to get vessel names so that I can hail them on the VHF to negotiate safe passing.

Any solution to quickly get the AIS info of a target on or near a route?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Impossible to Display AIS Data - jeokeefe@gmail.com - 06-20-16 12:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication