The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / SHD Power on problems

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SHD Power on problems
06-20-16, 09:28 PM
Post: #1
haveaday Offline
Junior Member
**
 		Posts: 11
Joined: Mar 2016
Reputation: 0
SHD Power on problems
I have a SHD radar unit that seems to have problems powering on sometimes. If 12v power is lost and then restored the radar unit fails to power on about half the time. When this happens the VCM100 will audibly click, the standby light goes out momentarily, the green on LED lights momentarily and then the green led is extinguished and the yellow standby is illuminated again. Sometimes I can resolve this by turning the power off and then back on. Other times I can only restore functionality by disconnecting the cable from the back of the radar pedestal and reconnecting it. Once the unit powers on it works flawlessly until power is lost again.

Does this point towards a fault with the VCM?

Thanks
Ben
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
SHD Power on problems - haveaday - 06-20-16 09:28 PM
RE: SHD Power on problems - haveaday - 06-22-16, 01:12 PM
RE: SHD Power on problems - haveaday - 06-27-16, 02:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication